mje

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: AEG Favorit 44070 kitchen door clip #432960
    mje
    Participant

    Re: AEG Favorit 44070 kitchen door clip

    kwatt wrote:No, it’s a kit only I’m afraid. 🙁

    On the upside, I found it cheaper and now here:

    http://shop.ukwhitegoods.co.uk/11109952 … fixing-kit

    K.

    Unfortunately, that is a different kit. The actual part I need looks like this:

    It is around 1.5cm square with 2 holes for screws and a sort of S shaped metal piece that engages into a slot in the dishwasher door.

    in reply to: AEG Competence D8100-1M keeps turning off #316090
    mje
    Participant

    Re: AEG Competence D8100-1M keeps turning off

    MarkJF wrote:Mine has been doing this for a while. I read the forum posts and changed the part you mention – no fix.

    I have today found a forum post on this link http://www.howtomendit.com/answers.php?id=257620 that says the main power switch is the problem.

    I have just tested it, switched the oven on to fan oven, let all the fans rev up, and wiggled the power button, and the oven switched off exactly the same as if the fault had occurred.

    I have just emailed the webmaster to see if they can supply a new switch, if not, I will have to repair the unit.

    Mark

    Thanks. I saw that post and I tried it but I cannot make mine turn off consistently by wiggling the power switch. Sometimes it turns off and sometimes it does not so I think all that is happening in my case is it is turning off for some other reason whilst I am wiggling the switch.

    I read somewhere the switch is not that easy to replace as the facia is glued on so bets of luck.

    Martin

Viewing 2 posts - 1 through 2 (of 2 total)