mkeen85

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: hoover vision dryer drum constant spin #436812
    mkeen85
    Participant

    Re: hoover vision dryer drum constant spin

    I found out what was causing the problem,
    the yellow sense wire on the element was charred so it wasn’t making a contact.
    I managed to get a replacement element from a donor dryer at work
    now it work like a charm 🙂

    in reply to: hoover vision dryer drum constant spin #436811
    mkeen85
    Participant

    Re: hoover vision dryer drum constant spin

    tomorrow i will check the transistors that drive the relays
    hopefully one is shorted else i will have to source a replacement board

    in reply to: hoover vision dryer drum constant spin #436809
    mkeen85
    Participant

    Re: hoover vision dryer drum constant spin

    i have checked and it, and it seems fine
    the only part that looks damaged in any way is the main motor relay, which has a bit of warping on one side but operates normal. As it is in a open state with out power and must switch to closed to make the motor run.
    it looks like there might be a fault with the controller ic,
    but other that it constantly spinning it works perfectly.

Viewing 3 posts - 1 through 3 (of 3 total)