[MohamedIbrahim]

Re: How to Reset Beko ASL141S Fridge Freezer Display

Hi All,

After 3 engineer visits, I am happy to report that my fridge-freezer has finally been fixed.

He first changed the display then the PCB (in 2 separate visits) but that didn’t help. Then they though it was a communication problem, so they wanted to change both display and PCB together. This time he came with a senior engineer.

* He checked ALL connectors with a multimeter (*behind the display, *on top of the freezer door and *under the PCB). When he put the old display back on, it worked. They think – when they tested the connectors – they must have pushed something back in place. That’s All.

I am happy it’s working but a liitle annoyed as this should have been done in the first visit.

All the best

Mohamed

[MohamedIbrahim]

Re: How to Reset Beko ASL141S Fridge Freezer Display

@kwatt: Many thanks. I will report back when it gets sorted.

Mohamed

[MohamedIbrahim]

Re: How to Reset Beko ASL141S Fridge Freezer Display

Thanks again for the quick response. I tried to follow your steps, but nothing happens after pressing the freezer Set button 4 times. Do you have a pdf of the service manual you can share with me? The user manual is useless when it comes to these problems.

Mohamed

[MohamedIbrahim]

Re: How to Reset Beko ASL141S Fridge Freezer Display

Many thanks for your replies.

@kwatt: I don’t have a “Select” button (there are two “Set” buttons). I held both Set buttons for a few seconds, but nothing happened. I have attached an image of the display.

@SAMURI: There’s no way to tell whether or not the display is locked. I tried pressing the lock button for 3 seconds a few times, but this hasn’t changed anything. In fact the Lock and Holiday buttons are the two buttons that don’t make any noise when pressed (the rest do). Following your suggestion I switched the machine off for 20 minutes, but that hasn’t done anything.

Mohamed

[Author]

Posts