[Morechocolate]

Sorry for slow reply. Yes, i’ve Checked everything in the manual. All filters have been cleaned (including the but you unclip to get to the pump bit)and all pipes to and from are clear as is the drain. If I start a cycle it pumps fine at the beginning and gets all the water out, does a bit of washing and then when it comes to drying it stops as it doesn’t pump the water out. But if I start a new cycle all the water gets pumped out. So I can do a wash cycle and then a rinse cycle and my dishes are washed without the drying.

it’s exactly the same issue I had about a year ago when the repair person replaced what they called the reed switch. I just feel like the same issue shouldn’t happen twice so maybe something else is wrong and I don’t know what it is.

fed up of throwing good money after bad but at the same time want to be environmentally conscious and not buy another machine unless I have to

[Morechocolate]

Thanks for the reply and reassurance in regards to the gunk

Tap is on and no kinks in the hose.

the wheel on the reed switch is going round. Ran a rinse and it got through until the end where it was left with a little bit of water in the bottom and check water light came on.

definitely no water leaking into the bottom

[Author]

Posts