[mpleach]

Re: Candy G01482 – Misbehaving

It happily pumps water, rinses, fills, spins on seperate commands with ease (but don’t want to assume the IC board is the culprit if it could be something else cheaper)

[mpleach]

Re: Candy G01482 – Misbehaving

Tried this and still no difference.

Aftr close examination and watching a full standard cycle the machine seems to behave normaly and runs the standard wash, rinse spin cycles etc, but @ the 15min mark (as denoted by the time LEDs) it keeps running. Rather than complete the cycle and wait to unlock the door when it finishes the fast spin it restarts the rinse and fills, empties, spins etc (and keeps going in a loop for this last part)

This continual loops runs about 2-3x before it tries to spin with a full wet load (and therefore bangs about and stops).

Does this shed any light as to what is wrong?

[mpleach]

Re: Candy G01482 – Misbehaving

Tried the filter, but not the sump pipe. Will try this and see if this helps

[Author]

Posts