[MrJB]

Re: F&P SMARTdrive is smarter than me..

Thanks for the advice guys.

I ran diagnostics as directed by Penguin45. Upon holding the water temp & power buttons down and releasing, I (think) I had 00100010 displayed. The machine would not let me press ‘spin speed’ until the ‘hold’ and ‘slow’ LEDs were lit.

I have also clarified the problem further. It appears that machine is stuck in ‘draining’ mode (as suggested by Penguin45). I filled the tub with water only to have it pumped right back out again when turning the machine on at the wall.

Thanks for the advice during the week guys. However, I have no idea what to look for or what to do when it comes to machine parts. I had a look under the hood. There appears to be no white marks or water in the computery-bits of the machine (as advised by FastAndPro). I am also unsure what to look for when FastAndPro recommended checking the pump resistance.

I am going back for another look. I await your replies.

Thanks again. MrJB

[Author]

Posts