MrSyko

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • January 10, 2015 at 5:29 pm in reply to: Beko 2542 FS Problem #423468
    MrSyko
    Participant

    Re: Beko 2542 FS Problem

    Is the wash motor the one on the bottom left of the picture??

    January 10, 2015 at 5:20 pm in reply to: Beko 2542 FS Problem #423466
    MrSyko
    Participant

    Re: Beko 2542 FS Problem

    It doesnt work on any setting at all 🙁

    settings available

    1 is pre-wash (no heat)
    2 is rapid
    3 is eco
    4 is quick and clean
    5 is intensive

    also a half load option which again makes no difference

    January 10, 2015 at 4:58 pm in reply to: Beko 2542 FS Problem #423464
    MrSyko
    Participant

    Re: Beko 2542 FS Problem

    Its cycling through fill/drain now on setting one pre-wash no heat

    so that possibly rules out the heater?

    January 10, 2015 at 4:52 pm in reply to: Beko 2542 FS Problem #423462
    MrSyko
    Participant

    Re: Beko 2542 FS Problem

    I took what i think was the heater out, the part behind the polystyrene float? and had a look at the pump on the motor, the pump blades rotate ok. there doesnt appear to be a leak anywhere

    as typing its just done another fill and empty..

    January 10, 2015 at 4:48 pm in reply to: Beko 2542 FS Problem #423461
    MrSyko
    Participant

    Re: Beko 2542 FS Problem

    Hi Kwatt thanks for the reply.
    No errors showing up, i did find a pipe going from the filter housing up into the higher parts of the dishwasher that was really clogged, ive removed it and cleaned it and just going through a cycle now (pre wash only)
    but it appears to be doing the same still..

    January 10, 2015 at 3:50 pm in reply to: Beko 2542 FS Problem #423459
    MrSyko
    Participant

    Re: Beko 2542 FS Problem

    A smaller image if mods could remove the larger one

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)