[Mustang]

Re: AEG Favorit FAV648000 Lack of water pressure?

Martin wrote:

Mustang wrote:
The wash pump then starts up, and I can see the rotor spinning. However, it doesn’t manage to push the water into the spinner arms and hence nothing cleans. Eventually, an AL5 error is shown.

AL5 is a water fill time-out error and/or a water level sensor error.

Hi Martin. Yes, but the machine seems to fill correctly. When I open it up to check how much water is in it after it fills, the level is just below the top of the filter at the base of the washer. It then starts to try pumping the water into the spinner arms, and that’s where it doesn’t work. The pump works, but no water. It’s almost as if it hasn’t got enough power to pump it around. There isn’t any blockage in the spinner arms or the pipes to the arms, so it must be something else. Any ideas what I could check next?

[Author]

Posts