Forum Replies Created
-
Posts
-
Re: Fisher Paykel Smart drive 053
You guys are absolutely brilliant.
The machine stopped again today so I took the top off the machine and all appeared in order until I unclipped the harness, and there was corrosion on the inside of the harness clip.
Mentioned the fact that you could operate the machine with the lid open to you know who, and I was told that “I have been able to do that for a long time”.
Off to the spare parts supply, fitted a new reed switch and harness and we are back to normal – for the time being.
Thanks fellas – bloody brilliant 🙂Re: Fisher Paykel Smart drive 053
Thanks KiwiwantsworkinCanada for your reply.
I checked it all out and that small spring on the fron LH suspension is intact and works OK.
The front RH suspension seemed a little “light” so I whipped off the front plate and checked out all the suspension springs – they all settle at roughly the same spot so I cannt be any happier about that.
If that is all that I can do I guess we now just sit back and wait for the next problem to arise. Just checked with Her Indoors and she says the W/M is working AOK at the moment. 😀
