[ncs]

Re: Zanussi 1265 E20 error then display death

Thank you Martin, We did speak to a couple of engineers who were a bit pessimistic about it. We got the impression that that it may well not be an economic repair/investigation since they suggested that the board will probably need replacing, plus call-out, labour, other parts, etc. If you have any further thoughts about this I would be very much value your opinion. Nick

[ncs]

Re: Zanussi 1265 E20 error then display death

No, it didn’t go on its side. I just tipped it back up to 45 degrees to get underneath.

[Author]

Posts