[Neilski]

Re: Beko 0if22300x

I think ive found the problem- there is visible damage to the selector switch and some of the contacts that seem to be connected where the cam pushes them down to select oven are warped out of shap so im suspecting its that. Thanks for the advice-i wouldnt of thought to check the switch tbh

[Neilski]

Re: Beko 0if22300x

Thanks again, if it was the switch would the fan still spin?

[Neilski]

Re: Beko 0if22300x

I had someone test the bimetal thermostat thermal limiter(fitted in the top right corner) and the cooling motor thermostat and we deduced it was the latter that was not functioning. I have just now replaced this but it is still not heating up at all.(n.b- the thermostat light stays on constantly and never goes off.) Any ideas? Seems like power is not getting to the element at all as when it blew before it had bad visible damage and still heated up a bit?

[Neilski]

Re: Beko 0if22300x

Thankyou very much for the advice, i shall take it apart again and get the old man to check the stats on the meter for me . Cheers!

[Author]

Posts