Forum Replies Created
-
Posts
-
Re: Problem with Creda grill
Forgot to thank all at uk whitegoods.
without your forum and website I wouldn’t have attempted this.
Thanks again.Re: Problem with Creda grill
Just wanted to update.
Have replaced regulator with part supplied by uk whitegoods.
After much scratching of head, figured out that the instructions supplied didn’t work in this case.
Looked up the strix regulator on google and found a diagram indicating the supply live and neutral and the load.
Then found a diagram for the Diamond H 41ER101C1P I was replacing it with.
From there I was able to figure out the following:
load live: 2 (single yellow)
load neutral: 4a (single black)
supply live: p1 (double yellow)
supply neutral: 4a (double black)This worked in my case, hopefully it might help someone else.
Re: Problem with Creda grill
Thanks for the reply,
I was on the brink of ordering, just wondered if you know if there is any difference between the 48148 and the 48148V.
Also if you have any idea how hard this will be to fit.
Really appreciate the help.Re: Problem with Creda grill
Having read previous posts with similar problem it sounds like the grills energy regulator.
Could anyone suggest which part number that would be?Re: Problem with Creda grill
Hi Thanks for your reply.
Have just had a look, the fan seems to be working, can feel the hot air being expelled from the front slots and can hear the sound of the fan. The grill has started working again, although the same as yesterday, coming on then going off quite quickly.
