Forum Replies Created
-
Posts
-
Hello Penguin45!
I should probably start a column “New Error of the Day”
Today’s entry would be “00100110”
Always happens on third push up of the spin speed button.It actually worked today through the whole cycle. Just as yesterday, but it coughed on the way – had to restart several times.
You’re right – no seepage detected. I’ll go with my best guess here. If the stator is the heavy round thing underneath, then I tightened it couple of weeks before the whole ordeal.
Let me know if Im miskaten.
Thank You!N.
Re: Fisher & Paykel GW709au
Hello!
Trying this again and this morning entirely different result:
LEDs lit(from long wash to spin)11100101
So it’s 229. Even more mistique if I may.
I must fess up I put the lid switch wires together about a year ago, be cause of the problems with the valves – it refused to intake water. Fixed the problem that did. Also it had been working in what seemed to be “selfdestruct” sequence during the spin cycle – sounded like it was priming to go off with a bang, just before it died. So something out of place is likely.
When I was diagnosing it, when I pressed “Advance” once, it didn’t make any meaningful sound – just a single beep. Is this right? I got the LED nubers when slow and hold were lit together.Thank You =)
N.Re: Fisher & Paykel GW709au
Similar problem with GW509NZ.
I tired the diagnostics test and got
10100101, which is 165
I haven’t got a manual for it.
The symptoms are short water bursts, then stops. I tried testing the pump and the valves which seem to be working fine. Found out how to do it thanks to this forum. After about 5 mins of playing with on/off switch is restarts. But otherwise even if I leave it unplugged for a minute and come back to it, it automatically starts beeping and blocks the keys. That’s why I have to be horrble to it just to get it to restart.
It was working fine until recently.
Has it’s time come or is there a chance that it can be still be saved?Thanks to this forum and all of it’s contributors.
Nick
