[NW123]

Thanks – fantastic result – all working now !

– Moved dishwasher from under counter top
– About 10 mm water visible in sump by impeller (fine) and everything else had been pumped out when the impellor was freed
– Tilted machine forward about 45 degrees
– Water poured out of the base of the machine (as suggested above)
– After mopping up, the error code “F” on the display cleared
– Cycles worked as normal (two last night)

[NW123]

Thanks – I will tilt (isolated from the mains) tonight and report back here !

The flood was caused by a peanut jamming the impellor so over a full cycle there was no water draining out and the level rose above the lower door seal.

[Author]

Posts