[Oletho]

Re: AEG LAVAMT clearing C9 error code after replacing brushe

tfcgw wrote:Applied these techniques to an AEG Lavamat 72600 that was showing error code C9. Replaced the brusehs but the washing machine equivalent of CTRL+ALT_DEL (complete reset) was different to that suggested above. With the Switch in the OFF position. Press and hold PRE-WASH and SOAKING buttons turn the control knob to Short Spin. Wait one or two seconds and all the indicators should illuminate. Then turn the control knob to OFF. All the indicators should go out. Then try and use your machine as normal. In my case this cleared the C9 error code.

Thanks!

Your reset procedure cleared C9 error on my AEG 88830 🙂

Oletho

[Author]

Posts