[ootoph]

Re: Cannon Harmony Spark Ignition

Thanks for explaining things – I agree with you that this seems a matter for the experts so I’ll track one down via the dreaded Yellow Pages.

To begin with, if it had merely been a case of replacing one part with another and didn’t involve a gas supply then I’d be perfectly OK to do this as electronics is a thing of mine.

But the risk of an explosion never really crops up when wiring up PCs etc – I’m really grateful for your time.

If you’re interested, I’ll let you know how it all worked out…

Have a good w/end

[ootoph]

Re: Cannon Harmony Spark Ignition

Mmm – thanks for the advice. I’ve checked through the circuit from cooker terminal block to mains plug and no probs there.

I wondered if it was the flame detector on the blink, ie not recognizing the oven was alight and trying to ignite it. Is this a likelihood with this model of cooker –
Model 10216G
Serial 751 0099

The igniter works perfectly well when the top oven is turned on, also with the hob rings.

Sorry to be a pain! There isn’t a site-recommended engineer in this area…

[Author]

Posts