ozz

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: Indesit Washing Machine WIXL163 trips RCD in fuse box #343099
    ozz
    Participant

    Re: Indesit Washing Machine WIXL163 trips RCD in fuse box

    Change the heating element for around £20. I would imagine this will solve your problem, plus its cheaper than getting someone out with a megger to most prob tell you its the element or the motor. Hope this helps.

    in reply to: very loud spin cycle #342996
    ozz
    Participant

    Re: very loud spin cycle

    Sorry guys its a ZANUSSI ZWD 1271W.

    in reply to: Zanussi ZWD1271W #326666
    ozz
    Participant

    Re: Zanussi ZWD1271W

    Any suggestions?

    in reply to: Zanussi ZWD1271W #326665
    ozz
    Participant

    Re: Zanussi ZWD1271W

    Just read an older post on here about the dryer heater causing problems because of earth leakage. On inspection my machine does seem to have alot of limescale type stuff oozing out of the dryer duct in a few places. I dont use the dryer but would this cause a problem for washing programs and rcd tripping? If so is it possible to remove the plugs from the heater and carry on using just the washing programs? Also any ideas how to test the element? I have use of a megger in work. Thanx ozz

    in reply to: Zanussi ZWD1271W #326664
    ozz
    Participant

    Re: Zanussi ZWD1271W

    Hi all now this bloody machine will turn on without tripping but runs for a few mins then trips! Confusing me 😕 any ideas or things to try would be much appreciated Thanx in advance ozz

Viewing 5 posts - 1 through 5 (of 5 total)