[p1]

Re: Servis M3008W-DOOR SEALED BUT STILL LEAKING?

ok thanks a lot for your help, but before i go, do you think that it will be worth the expense of calling out an engineer, the machine is about 5-6 years old?

[p1]

Re: INDESIT M3008W-DOOR SEALED BUT STILL LEAKING?

SMARTIN,

Just checked the tube and it is “in” the hole, so are you saying that it should just be glued to cover the hole or slightly in it?

Well the machine was leaking with the old gasket on so I thought that a new one would fix the leak 😳

[p1]

Re: INDESIT M3008W-DOOR SEALED BUT STILL LEAKING?

Smartin, I put the drain spout ino the correct position but did not use a sealant 😳 What sealant should i use now?

When the water left the dispenser it looked like it was entering the gap between the door seal and drum?

Flyman,

I have just checked the hose as you said but that looks ok.

Thks

[p1]

Re: INDESIT M3008W-DOOR SEALED BUT STILL LEAKING?

It starts to fill from the soap dispenser, the water goes stright to the door seal,looks like that is what is making it leak?

😯

[p1]

Re: INDESIT M3008W-DOOR SEALED BUT STILL LEAKING?

Just tried it as you said and it starts to leak straight away.

[p1]

Re: INDESIT M3008W-DOOR SEALED BUT STILL LEAKING?

To be honest I would say that its worse.

😳

[p1]

Re: INDESIT M3008W-DOOR SEALED BUT STILL LEAKING?

Sorry but its been a long day! its a servis washing machine.

regards 😳

[Author]

Posts