[Parko]

Re: Whirlpool American Fridge Freezer broken down – help!

Nibbly – My unit must be different as there were no screws under the tray.
I did manage to get the front of the unit off by removing the lower facia board and pulling the front of the dispenser at one corner (and waited for the plastic to snap!) 2 lugs along the bottom of the dispenser unclipped and the dispenser then slid down off some plastic hooks at the top.
That was enough excitement for one day..so I put it all back and will tackle the capacitors when I next have a minute.
Good luck 😆

[Parko]

Accessing Front Panel PCB?

Hi,
I really have read through the thread, but cannot find advice on gaining access to the front panel pcb.
There are no srews behind the drip tray in the front door as one person suggests, nor anything that resembles access without the fear of snapping the plastic.
All advice greatfully rec’d
Ian

PS.. tried to add picture !! But it’s a Whirlpool S20B TSB21_A/G 8586-150-15002 (11-0408-025820)

[Author]

Posts