[paularm]

Re: Hotpoint Aquarius CTD40 dryer – lights on but won’t work

SORTED!!!

This was really bugging me, I knew it had to be something simple – it was an issue with the door switch. The switch itself works fine but the little pin at the top of the door dosen’t press it in far enough. Pused a small screwdriver in to simulate the door being closed and hey presto!

Thanks

Paul

[paularm]

Re: Hotpoint Aquarius CTD40 dryer – lights on but won’t work

Thanks, sounds like I need to phone Indensit – dryer is only 3 yrs old and has not had hard use.

paul

[paularm]

Re: Hotpoint Aquarius CTD40 dryer – lights on but won’t work

Can anyone help with this dryer problem — Wife is giving me ear ache!

Could it have been a problem caused by my 3 yr old daughter constantly pushing different buttons, would this have caused a programming change?

[paularm]

Re: Hotpoint Aquarius CTD40 dryer – lights on but won’t work

If anyone else has had this problem, or knows something else to try I would be grateful. I’m not afraid to carry out any component replacement if anyone knows whats wrong.

Thanks,

Paul

[paularm]

Re: Hotpoint Aquarius CTD40 dryer – lights on but won’t work

Hi,

I have had a look around door switch is operational, no buttons are stuck you can press them, they beep and the light illuminates while your finger is still on the button, but goes out when you release them. I had it switched overnight and the next day the dryer worked for a few seconds and then stopped with the same problem.

Paul

[paularm]

Re: Hotpoint Aquarius CTD40 dryer – lights on but won’t work

Hi, No none of the lights are flashing – the empty water light is on as normal.
It won’t do anything when you push any of the program buttons and just beeps 4 times when you press the start button.

Paul

[Author]

Posts