Forum Replies Created
-
Posts
-
Re: Ariston AD10UK – _F01
Well after a little over a week of troublefree washing, the error cropped up again, however in a more consistent state.
I flipped a coin and figured the board is easier (and cleaner) to remove than struggling in a confined space with the motor. This paid off.
With the help of a magnifying glass*, I found dry joints on R4 and also the MAC15 triac. Resoldered these points, checked the condition of the rest of the board and components and re-assembled the machine. Working just great.
I was then handed her hairdryer…….
*I remember the days when I could do this with the naked eye, hhmph…age.. 😕Re: Ariston AD10UK – _F01
I managed to get it going again this evening without taking panels off.
I switched the unit off at the wall for about an hour. When I powered it up again, I noticed the doorlock LED was not lit, I pressed on the door, heard a click, LED came on and I was able to start a cycle. Only to be told off for not turning the temp down enough.
When I have a moment this week, I’ll check the brushes, circuit board and doorlock solenoid.
I’ll keep you posted.
