Peck81

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: Hotpoint LFT114 question #477893
    Peck81
    Participant

    Just to report back on this for anyone that experiences similar issues in the future, I removed the outer door and the dishwasher fired up and ran first time after a gentle close. I just now need to work out how to alter the door / wooden worktop bracket to sort it properly.

    Thanks to Dave for the advice, I’ll pay it forward. Cheers

    in reply to: Hotpoint LFT114 question #477892
    Peck81
    Participant

    Roger that – I’ll give that a go later and report back. Cheers

    in reply to: Hotpoint LFT114 question #477890
    Peck81
    Participant

    Hi Dave – thank you very much for this response. In answer to your questions, yes this is an integrated unit and yes I’ve checked the baskets etc.

    Really interesting point about the outer door. I must admit I do wonder if it’s connected to this and has just very gradually got worse and worse as the units have shifted slightly over time. It would also tally with me being able to get the programme started by physically holding the door in.

    I’m guessing this might be tricky to sort out if it is the case. Hmm. I’ll take a proper look tonight with your comments in mind. Thanks again.

Viewing 3 posts - 1 through 3 (of 3 total)