[Penners]

Re: Siemens dishwasher – water not heating, machine not stop

Thanks again, Specialist01269. Siemens agree with you!

I gave them a call, just to double-check that they feel the fault is likely to be the heater rather than the programmer, and they concurred.

Now all I have to do is find £100 for a new water heater! 😥

Thank you very much for your help and advice. Much appreciated.

[Penners]

Re: Siemens dishwasher – water not heating, machine not stop

Thanks very much, Specialist01269. I wondered if that might be the case.

Tomorrow I shall try adding some hot water to the machine myself, just as the main wash fill is starting. If run it on the coolest programme that might just fool it enough for it demonstrate that its programmer is, in fact, working when it gets the correct signal.

[Penners]

Re: Accessing Siemens dishwasher pump

nomadPaul and anyone else: I must apologise that this thread is based on an inaccurate report of my machine’s behaviour.

Please see my new thread for a question based on correct information:

http://www.ukwhitegoods.co.uk/modules.p … ic&t=62674

[Penners]

Re: Accessing Siemens dishwasher pump

Thanks very much for your response, nomadPaul. The FD number seems to be 8209, although on the same line of the plate as that (but some distance from it) is also the number 590016.

I hope that’s of some help.

Thanks for identifying access to the pump. Just my luck!! I think I’ll have to take the machine out to get the front plate off.

[Author]

Posts