[Philius]

Re: F&P smartdrive 051

Epilogue ->

Worked out that the drain pump seal had been slowly leaking some water onto the pump causing it to rust slightly. Pump would still run and operate correctly, but would overheat and stop. A self-reseting temperature fuse on the motor would stop the operation and then it would restart a few mins later.

Replaced the drain pump and the O51 works good again. 😉

[Philius]

Re: F&P smartdrive 051

Have tried something already, but not sure what it means.
i) Pressed and held down the Lower Wash Temp button
ii) pressed Power button
iii) All console lights light up
iv) after 4 or 5 secs, lights go out and the Rinse and Low Water Level lights stay lit
v) pressing the Hot or cold buttons activates the respective hot and cold selenoids

[Philius]

Re: F&P smartdrive 051

Our O51 is also playing up lately.
Can someone please email some diagnosis info to philius@tracktronics.com.au

Thanks

Will post results back here…

[Author]

Posts