[polycage]

Re: New Whirlpool not making ice cubes

I’ve moved the prongs round to 12 oclock. They were at 2 oclock. I tried to see if the water was frozen but I did not really know where to look.

I also powered the whole thing off and back on from the mains.

Cheers
George

[polycage]

Re: New Whirlpool not making ice cubes

Thanks Kevin. The infared sensor seems to be working as the light flashes when open and then stays on when I manually close the flap on the opposite side.

The ice cube tray is dry and there is no water coming out of the small pipe even though the drinking water part of the system works fine. I removed the lower back cover and the pipe going to the top of the machine (I assume this one is for the ice) is connected.

I’ve called out Whirlpool but they can’t get here for a couple of weeks. To be expected I suppose at this time of year. Shame as the ice would be handy during the festive period.

Thanks
George

[polycage]

Re: New Whirlpool not making ice cubes

I didn’t notice a bar in the bucket. There is an infared sensor and receiver on each of the walls in the freezer. I beleive that it sends a beam accross and there is a hole in each side of the bucket which allows it to pass through when the door is closed. Once the ice goes over these holes then it should not produce any more. At least that’s my understanding! But I’m probably wrong.

[polycage]

Re: New Whirlpool not making ice cubes

The model is RBB32 8586 158 150 00 in black finish.

[Author]

Posts