[prometheus]

Re: Electra AWM 1100B drum bearing replacement?

Dave_Conway wrote:Hover your mouse pointer over the red word “here” above then click on it, it’s a link to the part on our online shop 😉

2/3 days maximum delivery time 😀

Dave.

Thanks. I can’t believe I missed that. 😳 it’s late.
I’m ordering the parts now. 8)

Dave.

.

[prometheus]

Re: Electra AWM 1100B drum bearing replacement?

Dave_Conway wrote:

prometheus wrote:
If so where could I get one?

Here

As Mark says, it’s two bearings and a seal required for the basic job, you may need more as the bearings have obviously failed quite badly 😉

Dave.

Thanks Dave.

Do you know whether the parts required are easy to obtain?

Do you know where I could get the neccessary parts?

How can I find out the part number? as I can’t seem to find any contact information for a company called Electra, is it a rebadge of something else??

Sorry for the quickfire question round 😳
but I need to get it fixed for the kids schoolwear mainly.

It’s a relative priority and I really appreciate the help. 8)

[prometheus]

Re: Electra AWM 1100B drum bearing replacement?

Thanks for the response Mark

I did think it was strange that I could see beyond the bearing, ie into a void directly behind the bearing when looking up close with a torch, the inner bearing must be missing completely.

Can I just clarify, do I need to remove the drum assembly completely from the machine and then remove the rotating inner drum to gain access to the bearing from the inside of the outer drum?

I think that makes sense 😕

and please don’t worry, I have completely isolated the machine from both mains water and ❗ power ❗ .

Thanks again.
Dave.

[Author]

Posts