[PSU]

Re: Zanussi DCS-14W – sometimes getting ‘stuck’ in a cycle

I understand.

This of course begs the question – how do I get at the locking ring that you mentioned?

I’m pretty good with dismantling and reassembling items, but a manual would help to ID the part if you know if one is available to download anywhere please?

[PSU]

Re: Zanussi DCS-14W – sometimes getting ‘stuck’ in a cycle

I see, many thanks.

Regarding the locking ring of the salt chamber – do you mean the seal on the salt chamber refill cap ?

I don’t use tablets in this machine, just powder.

[PSU]

Re: Zanussi DCS-14W – sometimes getting ‘stuck’ in a cycle

Yes, water runs out of the front corner when I tip it.

[PSU]

Re: Zanussi DCS-14W – sometimes getting ‘stuck’ in a cycle

Dave_Conway wrote:Possibly a heating error, it may be worth checking the element (with the power off of course :zap:)

Thanks. However, the water heating in the unit seems to be working just fine (when the cycle is operating correctly and not ‘sticking’). Or are you saying that it’s possibly intermittent and the tilting of the washer is perhaps temporarily making good a bad connection somewhere in the heating or with the element?

[Author]

Posts