[pteron]

The micro-switch operates fine, so I suspect either the control PCB or the valve that should open to let the water flow into the machine. Can you tell me which valve it is? Is there any way to check it?

Is there anything to be done to the PCB other than replace it?

Thanks

[pteron]

Thanks Paul, I’ll check that out tonight.

[pteron]

Re: Bosch SGS4302 – not heating up and stuck on 1 minute

I have a similar problem and have the sides, bottom plate etc off. I’ve removed and cleaned the fill pipe highlighted on the first page, but can’t see how to disassemble the fill control – do I need to take off the water containing panel on the side or is there an easier way of getting the fill control out?

Any pointers gratefully received.

[Author]

Posts