[RayJ]

Re: Bosch WFL2450 drain pump impellor loose ?

Hi,

Exactly the same happened to ours. I couldn’t see how the impellor was fixed, but when rotated by hand after dismantling it didn’t have the ‘2 position’ magnetic stop indicating it wasn’t tied to the motor shaft correctly. rotating the motor shaft felt good (easy/hard/easy). So – a small pea sized piece of BluTack on the motor shaft end ‘cam’ drive thing, firmly push the imellor back on and Robert’s yer Mothers Brother. That was 2 weeks ago of solid use and no problems so far. I dare say a blob of ‘Sticks Like Sh*t’ trade sealant or Araldite would do the same job. Saves £50 for a new assembly.

[Author]

Posts