redwebster

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: Hotpoint Aquarius DF62 will not take in water #170563
    redwebster
    Participant

    Re: Hotpoint Aquarius DF62 will not take in water

    Yes I checked the pump the way you have indicated and it does turn as you have stated. Fill hose was definitely not kinked
    Thank you for your kind assistance and i will take your advice and call in the experts

    in reply to: Hotpoint Aquarius DF62 will not take in water #170561
    redwebster
    Participant

    Re: Hotpoint Aquarius DF62 will not take in water

    Thanks for your speedy response. I checked the Drainage pump for any blockage, it appeared to turn OK. If it helps to understand my problem I recently moved and the dishwasher was connected up last Friday. I used it ok on Saturday night but it would not work on Sunday. I pulled out the machine and noticed a severe kink in the drainage hose where it had been flattened/trapped this i straightened and cleared.
    When i switch on the machine it makes the normal noises which changes if you turn the dial around manually but I would not describe them as faint buzzing noise. It sounds as though water is going in but it is dry inside.
    Unscrewed inside of door but I was unable to remove?

Viewing 2 posts - 1 through 2 (of 2 total)