[rf80racer]

Re: AEG FAV44050VI leaking water from regen dose

Thanks for the reply Clive.
I removed the rubber pipe from between the bottom of the metering tank and the sump and it was completely clear, also could see and feel inside the sump this is clear in the bit I can see with the hose off.
So I’m still stumped with this. As a temporary measure I have put heat proof tape over the window in the tank an pierced a few air holes in it. This effectively stops the water spilling out of this window for now so I can use the machine. I know this is a bit of a bodge though so need to finish the job.
The only other thing I can see is a bit of discolouration like scale in the tank so it may be a bit blocked in one of the water ways in the tank restricting flow.
I’m going to try some descaling fluid through the tank next and see if I can clean it up.

[Author]

Posts