Forum Replies Created
-
Posts
-
Re: Neff S54M45X5GB/90 not filling with water
Thanks for the reply. Makes total sense. Is it likely to have killed anything else though? Ie should I take the risk of buying the aquastop, or bin and buy new.
Re: Neff S54M45X5GB/90 not filling with water
I agree, it seems the most obvious culprit, but if i replace that and it’s still broke I’d have spent £150 for nothing in which case it would be better to replace.
Just wondering what else it could be if not the aquastop.
Re: Neff S54M45X5GB/90 not filling with water
Let me clarify further. So the guy came around and noticed that the sequence in which the DW was working was wrong. It would drain, but rather then then try to take in water, the valve that allows the water into the chamber that then goes into where the dishes are was operating.
So he checked pcb and there was a split through a component and a small black mark on the plastic above the failed component.
Now that the pcb is replaced you can now hear the aquastop vibrating when it should be taking in water. But no water is coming through.
Re: Neff S54M45X5GB/90 not filling with water
But the pcb had blown, so assumed that would sort it.
Can it be anything other than the aquastop?Re: Neff S54M45X5GB/90 not filling with water
Ok so pcb arrived and is now fitted. Set it to C3 per the instructions.
The aquastop now vibrates when the DW requests water, but no water is going in still (I’ve got the left panel off so I can see the water matrix).
There is definitely water at the cold water feed, just took the aquastop off the water feed end to check.The machine shows the tap symbol suggesting to check water again. Did a ‘reset’ and tried again, same result.
Any ideas?
Re: Neff S54M45X5GB/90 not filling with water
So I bought a new PCB: https://www.amazon.co.uk/gp/product/B00Y736WSK/
Waiting for it to come. Will I need to do some key combination to set the right mode on it? I recall seeing another thread somewhere where they replaced a PCB and they had to set it to the right mode. I know my current one is C3, so if this replacement was set to something else, what are the steps to select the right code?Thanks
Re: Neff S54M45X5GB/90 not filling with water
Had someone round today to have a look, turns out its the PCB, can see one of the components has a crack through it! Thanks for your help.
Re: Neff S54M45X5GB/90 not filling with water
Just a thought, can I use a standard fill hose? Would be a shame to spend £80 and find it doesn’t help. If so what hose would I need? Thanks!
Re: Neff S54M45X5GB/90 not filling with water
I have, no worky!!
Does that mean the reading suggests it’s ok?
Re: Neff S54M45X5GB/90 not filling with water
I couldn’t remove the blue and brown as its part of the white block. But I removed the red/purple. Same result?
Will that have worked? Photo below
Re: Neff S54M45X5GB/90 not filling with water
Will try later when I’m back home, is there anything else worth checking?
