Forum Replies Created
-
Posts
-
Re: Bosch WFG 2420 Replacing door gasket
Yes I get it too. I hope advice was safe. Many thanks Andy.
Re: Bosch WFG 2420 Replacing door gasket
Hi Donald,
Good luck. I have just re-read my posting and a couple of points I forgot to make. Yes, you can see the loom clearly and how it connects to the door mechanism when the front panel is loose and ajar slightly. The other point is the front spring clip obviously needs to be taken off first as it is attached to the front panel.
My gasket was so damaged it had already come away so I didnt need to do that and forgot to mention that part of the sequence.
Good Luck
Andy
Re: Bosch WFG 2420 Replacing door gasket
Success. The hardest part was getting the outer clip on. The rest was pretty straight forward. I am now taking advice from elsewhere on the site and giving the thing a hot was clean.
Re: Bosch WFG 2420 Replacing door gasket
OK – I wont bore you with the details but looks like I am going to have to do this myself. Is getting the front panel off the hard part? I presume there is a door sensor to detatch and a few screws. Is that it – or is there a cunning bosch device holding it all together.
