[RMC]

All solved.

Replaced D7 with a schottkey rectifying diode (100v, 2A) and it seemed to do the job.

For anyone suffering from the same , test your D7 diode and go from there.

Cheers Dave,

[RMC]

Hi again.

As I mentioned on my second post, I am indeed getting a 0V reading across the diode whereas usually you would read a volt drop of around .2/.3 depending on the type of material used for the diode.

I have just bought a set of 100V, 2A rectifying diodes to replace this one to see if this fixes the issue. I’ll report back.

[Author]

Posts