Forum Replies Created
-
AuthorPosts
-
roadster
ParticipantRe: Built Under Double Oven with Controls on the side??
don wrote:Hi roadster
I must admit that picture is not one of the best it doesn`t really do it justice 😕
Try the Zanussi equivalent (same stable as Elecrolux) Zanussi ZOU575 much better picture 😉
DonYes, that’s much better. I think I need to see it in the flesh …….
roadster
ParticipantRe: Built Under Double Oven with Controls on the side??
Thanks for the info.
I’m not sure that I like the Electrolux. I’ll have to see if I can find it on display somewhere or just resign myself to the fact that the controls will get hot ………….
roadster
ParticipantRe: Beko DWD5410 Wash program stops
Diagnosed faulty control pcb. On back order with BEKO for about a month now 👿
Ah well, at least it didn’t work long enough for me to get used to not washing up by hand ❗
roadster
ParticipantRe: Beko DWD5410 Wash program stops
I placed an engineer call via the repairs@ service but so far no response from the (West Midlands!?) company. I called the Beko Service number which routed through to a Leicester based Company but they could only offer an appointment in June 😯 .
Can anyone recommend a local (Leicester / Market Harborough) company?
Is there a generic “How a dishwasher works” explanation anywhere? I used to be a computer engineer, so not afraid of getting into electro / mechanical devices
PS After inadvertently leaving the machine switched on I noticed that the wash cycle does actually end, although no wash action occurs.
roadster
ParticipantRe: Beko DWD5410 Wash program stops
OK, will do.
Thanks anyway.
roadster
ParticipantRe: Beko DWD5410 Wash program stops
Dave_Conway wrote:Can you check the model number please, BWD5410 or even BDW5410 (tried both) aren’t correct 😉
Dave.
Definately DWD5410 on the front of the machine
http://www.beko.co.uk/default.asp?docId=12664&productGroupId=15331
roadster
ParticipantRe: Beko DWD5410 Wash program stops
Anybody? Before I call an engineer…..
Any help appreciated as it sounds like something relatively simple. The machine has only done 5 or 6 cycles so it can’t be build up of deposits or anything like that.
Thanks
-
AuthorPosts
