Forum Replies Created
-
Posts
-
Re: Indesit WD12X double fault?
Hi again. Just changed the thermister. The original fault is still there, it still insists on pumping regadless of initial setting. I have however discovered that if i leave the thermistor disconnected I can get the wash cycle to start. This proves the pressure switch at the inlet so at least that is illiminated. With the pcb looming any other checks before I commit.
Re: Indesit WD12X double fault?
Thank you for such a prompt reply.
i thought afterwards that the system may have sensed it both ways, i.e. a fault and then that it was missing. I am busy most of this weekend, but as the kettle has just bolied i will try a quick an dirty resistance check before i head off to work. Untimately i will order a sensor as it was pretty gunged on the surface when i removed it. As advised it was above the heater element.
