Forum Replies Created
-
Posts
-
Re: Tricity Bendix TBDW41 911841075
Penguin45 wrote:Remove lid and left-hand side panel. This will reveal the IWMS – a large plastic panel, often full of water. Look at the bottom two inches of it closely – if it appears to be black or gungy, it’s choked and the water level control will not work properly.
Power off for anything other than observation, please.
Penguin45.
Hi there P45…you are describing a problem which I have with my DW and I would be very impressed if you can help. I have removed the IWMS and the lower areas at the bottom right and to a lesser degree in the centre are black. It is difficult to see if this blackening means that it is full of deposits or whether it is just the inner surfaces of the plastic that are coated. What is the best way to remove these deposits. Fault with machine, btw, has been a bit intermittent but generally it will not fill. All water valves test OK. Thanks in anticipation….
