Forum Replies Created
-
Posts
-
Re: Indesit WIL103 Fault Lights
Penguin45 wrote:If the motor is not running under proper control, the drum will bang about all over the place.
See Iadom’s first reply.
Penguin45.
Well it seems to have died now!!
It’s 5 years old now so I’m assuming it’s not worth fixing going by the prices for spares when you add labour and call out charges. I don’t have much of a budget for a new one neither 🙁
I’ve been looking at the John Lewis ones with 3 years guarantee, made by AEG and Zanussi from what I’ve found. Are these ok?
Re: Indesit WIL103 Fault Lights
iadom wrote:Not much you can do TBH.
Light four flashing indicates a motor triac fault, could be broken motor to main PCB wiring or connections but the odds are on it being a failure of the main PCB. 😥
The electronics on these are very suspect.
Thanks for the reply 🙂
I turned the machine off for a few hours and it was ok for nearly a week after that, then the lights came on again. I’ve noticed this happens after the rinse cycle and the machine is VERY noisy and bangs alot! Turned it off and it works as normal just noisy every now and again.
Having searched the net abit more it seems to be a common problem but I’ve not found out what causes it? I have no insurance for it and I don’t know whether to get it repaired or buy a new one?
TIA
