Samsung

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: SAMSUNG RS20CCMS problem #248798
    Samsung
    Participant

    Re: SAMSUNG RS20CCMS problem

    smartin wrote:if you trace the wires from the element up all the connectors for the sensor,heater and thermal fuse are there, yellow wires are the defrost sensor, red and black are heater and thermal fuse, thermal fuse is tucked behind evaporator.

    OK done all of that and the results are

    Heater 430 ohms
    defrost sensor 7.45K ohms
    thermal fuse 6 ohms

    the other (middle) plug with red and black wires which go to the cylinder thing on top of the evaporator have a resistance of 213 ohms.

    Do any of these look wildly out of spec?

    Cheers Dennis

    in reply to: SAMSUNG RS20CCMS problem #248796
    Samsung
    Participant

    Re: SAMSUNG RS20CCMS problem

    smartin wrote:unplug machine 1st. there is no evaporator in the fridge in this machine all freezing is done in freezer and air blown into fridge, you will need to test thermal fuse,heater and defrost sensor with a multimeter like r600a said.

    I am capable of testing with a multimeter, I just need someone to tell me where the thermal fuse and defrost sensors actually are! I have taken the panels off in the freezer side and have exposed the cooling matrix and heater and I can see the fan unit at the top but no sign of any thermal fuses or sensors apart from the ones behind the red blister things. Should I take the fridge side apart to find these?

    Cheers

    in reply to: SAMSUNG RS20CCMS problem #248793
    Samsung
    Participant

    Re: SAMSUNG RS20CCMS problem

    r600a wrote:Hi

    On right of the fridge are connectors,top thermal fuse ,middle defrost/drain heater,botton defrost sensor connected onto suction pipe.

    or give Samsung a call and state watchdog complaint.you may get somewhere but cant promise.

    Bryan

    When you say the “right of the fridge” do you mean in the refrigerator section behind the panel? I haven’t been in there yet. (and remember it’s an RS20)
    Thanks Dennis

Viewing 3 posts - 1 through 3 (of 3 total)