[scratch339]

Beko WMA 765 S Fault

fairy4 wrote:The 1200 spin indicator is flashing and also what looks like a 1L on the display…the 1 is flashing and the start button is on a pause light.

I have this exact same problem/indication on the same machine…

I’m assuming there was no solution at the time this post was originally put up, wondering if anyone has come across this problem more recently and has a solution/diagnosis?

The machine will not respond to any inputs, just the symptoms described by the OP. I suspect a PCB fault but would like to get an opinion before i call an engineer in just in case there is a simpler & cheaper option.

Any help would be gratefully received

[scratch339]

Re: Bosch WFD 2460 – Unknown Error Code

Thanks for you help greg…

Drained it out today, water had the most VILE eggy smell ever :eeek:

Pump was blocked by some lumps of conjealed powder… and a zip tie. Must remind the missus to check my pockets before washing my clothes 😉

Cheers for all you help 😀

Ian

[scratch339]

Re: Bosch WFD 2460 – Unknown Error Code

Penguin45 wrote:

scratch339 wrote:
Currently got top/middle flashing together.

Go on, tell him.

Go on, go on, go on…… 😀

Penguin45.

>Sits on edge of seat….<

[scratch339]

Re: Bosch WFD 2460 – Unknown Error Code

Hi Greg, thanks for the quick reply…

About half-way thourough the cycle, the machine has stoppped.

There are 3 vertical red lights (wash/rinse/spin)

The top 2 (rinse/spin) are flashing together.

I think its possibly a pump fault. Have replaced the pump before on this machine… just not looking foreward to having it apart again so simnply would like a bit of pre-warn so i KNOW what it is before i give it some tools 🙂

Cheers, Ian

[Author]

Posts