[sddjs]

Re: BOSCH – SRV43M03GB dishwasher, new but not working.

Thanks very much Martin, I managed to free up the seized circulation pump yesterday and everything is running fine now 🙂

[sddjs]

Re: BOSCH – SRV43M03GB dishwasher, new but not working.

Martin wrote:Right hand side panel off to access. Power off don’t forget!

Ok thanks

[sddjs]

Re: BOSCH – SRV43M03GB dishwasher, new but not working.

Martin wrote:Main circulation pumps seize through inactivity so it could be that. Power off first then check to see if the rotor will turn by hand.

Is that accessed below the filter in the sump?

I assume the procedure is: torx screw undo, remove panel, hand turn rotor…

[sddjs]

Re: BOSCH – SRV43M03GB dishwasher, new but not working.

Martin wrote:What programme did you select?

I have tried them all : 65, 50, 35,rinse.

My only theories:

Something has seized, due to inactivity.

Kink in drain hose, although seems to drain ok when doing a reset.

Some kind of circuit board failure.

[sddjs]

Re: BOSCH – SRV43M03GB dishwasher, new but not working.

kwatt wrote:Please don’t post than one thread per problem, the guys will help you if they can.

K.

I think i pressed F5 to refresh to see if there had been any replies, not an intentional re-post….

[Author]

Posts