Forum Replies Created
-
Posts
-
Re: bosch sticking on 36 mins
i think you are being far too cautious,why not put it on its side ?,there are no moving parts except the pump,also,i had nothing to lose,it didnt work,so i was going to have to buy a new one ,anything is worth a try.
Re: bosch sticking on 36 mins
i put the nozzel of the hose into the filter area and then “blasted” the water through,i also think being a dishwasher,its pretty waterproof when “blasted” with water from the inside.
Re: bosch sticking on 36 mins
no idea of how to take the lid off,and there are no screws on the front panels,so i took it outside,removed the filters and put a hosepipe into the filter basin,blasted water into the hole,turned it on its side and did it all over again,put it all back togeather and hey presto,it works.and no,nothing came out of the waste pipe except dirty water,could it be the float,i dont know,but it now works so im happy.
Re: bosch sticking on 36 mins
ive taken it outside to strip it down,there are 4 plastic pins holding the sides on,( instead of screws ) if i break these to get the sides off,then i cant get it to fit back on,also the bottom is an all moulded single piece,and i cant even find any screws which hold the top in place,any ideas of how i can dismantle it ?to me the pump houseing seems to be fitted from the bottom of the machine which i cant seem to get at,removing the front bottom cover is no use either ,im met with a single piece of plastic which is part of the bottom piece.
what does the matrix do ? it sounds like the pump is running,but nothing comes out of the waste pipe.ive taken a plastic cover of the impeller houseing inside the machine,this can be turned by hand,so it doesnt seem to be blocked.
