[sianyfix]

Re: hoover tumble dryer fault

This is the same fault as mine – I’ve now replaced the relay and it’s working! Found this post on google!
My struggle was to find out how to get the front off it’s easy now I’ve cracked it but I thought I’d post how to take the front off in case anyone else out there is struggling.
Unplug! Remove the top by undoing the 3 screws at the back and sliding the wooden top out. Remove the side plastics (loosen screws in slots). Remove the 4 screws at the front. Tilt the dryer and remove 4 screws at the front underneath. Open the door and remove 11 screws around the opening. note the 3 screws by the filter are shorter for when you come to re- assemble. The front then pulls off and you can get at the 2 screws that hold the PCB on. I had to cut the cable tie and move the wires to get enough access but easy enough. Hope this helps someone! sianyfix.

[Author]

Posts