Forum Replies Created
-
AuthorPosts
-
simon26r
ParticipantRe: Repair care
cheaper number is 01217666222
they waste your time.
filled out forms then one day out of nowhere they called. said sent this and that.
a couple of calls later they said they don’t need anyone in the area.
then a week later they are on the phone again.
if it’s like it used to be you have to pay for parts the get it back at the end of the month.simon26r
ParticipantRe: customer Net whirlpool
thank you
simon26r
ParticipantRe: RSH5UBMH blocked with ice
Thanks Bryan. I knew you would have the answer
simon26r
ParticipantRe: Miele W3740 Not happy
thank you. sorry for the late reply
simon26r
ParticipantRe: BEKO AB910 AMERICAN FF FREEZER FAN ISSUE
more than likely the pcb. be careful as most fans are DC in the range of 12 to 24 volts
simon26r
ParticipantRe: zanussi dryer
check your inbox 🙂
simon26r
ParticipantRe: Britannia SIE10XG-CL-GC Range Cooker
I looked at one with a different model but it had a cut in switch.
simon26r
ParticipantRe: beko heat pump dryer dsx83410w
blocked with fluff i would guess. been to loads of them, beko, samsung, zanussi ect
simon26r
ParticipantRe: Commercial warranty on domestic appliances
buy cheap, use then bin it or just clean out the filter 🙂
simon26r
ParticipantRe: Britannia top oven selector
Thank you. I did look on aws but could not find it.. great help
simon26r
ParticipantRe: WhatsApp Group
No. I would set one up for lux, one for lg ect. Limited to areas like. North south ect. . You can also disable the ping on a group.
Already support a local group for daewoo and catasimon26r
ParticipantRe: Fisher & paykel
I will pass the message on. Thanks dave
simon26r
ParticipantRe: T75280AC AEG dryer no heat
Probably main pcb. Put into test mode. Turn on and hold the last two buttons on the right.
simon26r
ParticipantRe: AEG Dishwasher
Pressure switch kit number.
simon26r
ParticipantRe: LG F1403YD5 noisy when slowing down on spin
Hi. I do a few lgs but have not come across this problem. Some lgs are hard to test the bearing as the motor stops itself turning when you try and spin the drum. Main noise i get from them is the side with just one leg banging. As it slows.
-
AuthorPosts
