[Siraz270470]

Re: FZA50 Hotpoint future freezer, bottom drawer built up of

Hi Bob,
Thank you for your reply.

I did check the tray at the back and took this out to clean the tray and the rubber was inserted into the hole under the freezer and it was tight to the compressor tray hole, I will then have to shorten it the rubber pipe so it is not touching the tray and leave about 1/2″ gap, so the water can drain freely into the compressor tray.

Thanks again Bob.

[Siraz270470]

Re: FZA50 Hotpoint future freezer, bottom drawer built up of

Hi Bob,
Yes you were right, as the drain was blocked up with ice.

I unplugged the freezer, food went to next door neighbour freezer, took. All drawers out and then remove the panel from the inside freezer, by taking out 2 bolt at top and 2 bolt just near the bottom area and I just slide it foward to take it off.

You can clearly see it was iced up and also it had iced on the bottom silver thing.

However it is all fine and no more ice since yesterday.

Thanks again.

[Siraz270470]

Re: FZA50 Hotpoint future freezer, bottom drawer built up of

Thanks Bob for your reply I will place the food my next door neighbour freezer for 2 days and let it defrost and see how it goes.

[Author]

Posts