[slickinsox]

Re: Nuova Ibmei: Electric question

I suppose my question is a little too broad so let me narrow it down a little;

Why would there be two wires powering each mode/speed of operation?

[slickinsox]

Re: Nuova Ibmei: Electric question

I have a Nuva Ibmei HV 21 similiar to the above that i want to use for a project.

Its a 2-speed 240v AC reversible motor with five wires as follows (left to right and top to bottom);

1.black stripe, 2.blue, 3.yellow,
4.no wire, 5.red and 6.orange.

Resistance between terminals is as follows;
1/2 9
1/3 50
1/5 23
1/6 50
2/3 57.5
2/5 35
2/6 57.5
3/5 75
3/6 50
5/6 75

Testing the wires on a motor in a host machine indicates;

1. always has 240v
2. and 5. are for fast speed
3. and 6. are for slow speed and are connected to the startup capacitor

Given there is no wiring diagram on the casing or inside the washing machine it is possible to reverse engineer the wiring diagram for the motor?

[Author]

Posts