[smithcd]

Re: Zanussi dishwasher flooding

bazza500 wrote:You will probably have to fit the pressure switch modification kit part number 405 53 46-06/0.

The 2 pipes you are talking about are probably the pipes from the side of the door to the base and are not connected to anything

Thanks for the reply Bazza. I’ll have a look into the pressure switch kit

[smithcd]

Zanussi dishwasher flooding

Hi all

I have a zanussi zdv12002fa GHE423DA2 (PCN 911 079 006 01) dishwasher that keeps flooding.

Upon inspection there are two small black drain pipes that are pulsing water when operational and have either come loose or have never joined to anything. I have had the front and base panels off and cannot find the joining point for these hoses.

Am I missing something obvious? Are these hoses suppose to lead to the base panel to flood and therefore stop the dishwasher working?

Any help would be greatly appreciated.

Mods… sorry for the duplicate posts

[smithcd]

Re: Zanussi Dishwasher Flooding

Oh man… thank you for your help. I have reposted in the dishwasher section

Mod edit:

Have deleted the other thread even though it was in the correct forum as this one has had a reply. Moved this one to the correct forum 🙂

Hope you get the problem sorted.

Don

[Author]

Posts