Forum Replies Created
-
Posts
-
removed and refitted brushes, plenty life in them. when removed they were stuck in place. moved them a few times, refitted and the machine seems to be working for now. thanks
ive reset the thermostat as mentioned online, running it to test now.
un screw this from the back panel, and at the top you will see three thermostats. There is a brown one with a small hole in the middle, if you use a pin and press in, you should hear a click. This resets the thermostat and you should be able to use the drier again.
First time we’ve noticed it, it normally gives a error code for brushes and there was something else. I’ll try get a look at the lights. It’s and old machine, I couldn’t see it when searched the model. Thanks
electrofix wrote:right so it fills with water y/n
does the motor move ?
if it is a heat problem does it work ok on a rinse programme ?
have you got the model number so i can know which system your talking about
Dave
yes it fills with water
this is how she describled the rinse cycle: It went to 18 mins from 24. Which took about 20 mins…. Then it jumped back to 25 mins.. Paused itself with light flashing
zanussi progress 1400 Zwf 1431 s i can go down and try find a tag with model number is that isnt anygood.
It’s not displaying a error code this time. She says it happens 5 mind into, she thinks it’s when it’s supposed to heat water to temp
Bought ones you first recommended, arrived today. Machine is working now. Just put it on a spin. Can it be used as normal now?
Ones I got are different, doh
Similar but different, serves me right for going with cheapest option.
