[SpannerRash]

Re: Leaking Bosch SGS4002GB

Thanks for all the help.

I took the sides off. It was only after a lot of bodging and bending that I discovered the top is supposed just to slide off, allowing the sides just to unscrew… 😳

And all the links helped.

I couldn’t see an obvious leak, so I took off the water inlet unit (just because it was easily accessible), cleaned the pipes and seals and applied some sealant. I’ll see if that fixes the problem. If not, I’ll poke around a bit more.

[SpannerRash]

Re: Leaking Bosch SGS4002GB

Thanks for that link. I found an exploded diagram on there, and I suspect that’s how my dishwasher is going to end up looking. 😳

But if anybody can tell me where to start… (after unplugging it!) Attack it from the inside, or turn it upside down and try to remove the base?

[Author]

Posts