Forum Replies Created
-
Posts
-
Re: electra awm1100b eco has power/water but does nothing
hi i think ive found the correct resistor at RS electronics.
http://uk.rs-online.com/web/search/sear … &R=1997882
can you just confirm this for me before i buy :0)
thanks.
Re: electra awm1100b eco has power/water but does nothing
hi sorry to be a pain but im having trouble locating the correct replacement resistors.
i cant find them on either the maplin or the RS websites!
am i searching for the wrong thing? lol
it says on the resistor: 6.2KΩ J 5W
but alas i cant find an equivalent!
Re: electra awm1100b eco has power/water but does nothing
thanks for the info :0)
i think i may as well change both resistors.
but i notice on the board that the second of the two resistors has shrouds on the legs going to the board. see pic.
why are these shrouds used?
Re: electra awm1100b eco has power/water but does nothing
ok removed a leg of one of the resistors from the board but could not get a reading across it.
my mutimeter display does not change when applied
just in case i checked if my meter was ok to check this ohm range and it said it could test Resistance at 20Mž ±0.8{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}.
Re: electra awm1100b eco has power/water but does nothing
hi checked both resistors, they are both rated 6.2kohm
and both register 5.6kohm on my meter :0)
Re: electra awm1100b eco has power/water but does nothing
ok ive put the machine back into ready to use order, motor back, water/power etc and removed the door lock to manually activate it.
the door lock acts as expected when it is ‘fooled’ into making.
the safety solanoid lock within the door lock activates, but the machine still sits waiting and doing nothing :0(any help gratefully received
Re: electra awm1100b eco has power/water but does nothing
hi sorry, yes i should have posted more pics,
and yes it does have a ‘v’ belt :0)
hope these help more>
